Placement Of The Monitor; Placement Of The Camera; Mounting The Camera On A Tabletop Safely - Levana Lila Manual

Placement of the Monitor

This monitor can be placed on a tabletop.
• You can place the monitor on a tabletop by using the retractable table
stand on the back of the monitor. When not in use, simply tuck the
table stand away into the back of the monitor until you hear a "click".

Placement of the Camera

This camera can be placed on a tabletop or hung on the wall above the
area being monitored.
• Place the camera within 15 feet of the area being monitored for best picture results.
• Do not place objects within 2 feet of the field of vision of the camera as the night
vision will not activate correctly if objects are too close.

Mounting the Camera on a Tabletop Safely:

To increase the downward viewing angle of the camera, please insert the included
camera wedge to the bottom of the camera (see below).
1. Place the camera on a tabletop no less than 3 feet away from your baby's crib.
2. Feed the power cord down the back of the table or use wall clips (not included) to
secure the cord away so the baby cannot reach it.
3. Plug in the power cord, check the monitor to ensure that you are getting a
good view of your child and there are no obstructions.
CAMERA
BOTTOM
Note: Baby monitors and cameras with power cords should never be hung on or near the
crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away
from the crib and the baby's reach at all times.
WITH
WEDGE
13
OPERATION
3 ft
3 ft
WITHOUT
WEDGE