LET'S GET STARTED!
Battery Installation
1.
Gently remove the STAND CLIP on the back of
the monitor to allow access to the BATTERY
COMPARTMENT COVER.
2.
Slide the BATTERY COMPARTMENT COVER down
to remove.
Insert the battery with the words "Rechargeable
3.
Battery" facing towards you. The battery
connectors should line up with the connectors
inside the battery compartment.
4.
Slide the BATTERY COMPARTMENT COVER back into place and reinstall the
STAND CLIP.
Get the Most Out of Your Rechargeable Battery
•
Fully charge battery (4 hours) before first use.
•
To maximize battery life, charge battery before battery is fully drained.
•
Avoid extreme heat or cold as this will affect the life of the battery.
•
Turn LCD screen OFF; press POWER
•
Lila
menu settings that increase battery life:
™
PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode.
Adjustable Brightness: Decreasing screen brightness will extend battery life.
6.
For extended periods of non-use, please remove battery from baby monitor.
Battery
connectors
button on the front of the monitor ONCE.
9
SETUP