How The Cycle Works; Setting The Controls - Kenmore 665.75832 Guía Para El Uso Y Cuidado

HOW THE CYCLE WORKS
The SELECT CLEAN
TM
Self-Cleaning cycle uses
temperatures much hotter than normal oven use to
break up and burn away soil and grease. SELECT
CLEAN will set the clean time automatically, once
you choose the soil level. You can choose SoilL
(light soil), SoilA (average soil) or SoiIH (heavy soil).
SoilL will clean for approximately 2-2_ hours, SoilA
for 3-3_ hours and SoiIH for 4-4_ hours.
The door must be closed completely for it to lock and
the cycle to begin. If properly closed, the door will
lock approximately 6 seconds after START/ENTER is
pressed. The cycle time includes an approximate 30
minute cool down time. To see the time of day during
the cycle, press CLOCK for 5 seconds.
SETTING THE CONTROLS
_0 _,_}_tl (}/_a _l {_ PRESS YOU SEE
1.
Press SELECT CLEAN.
[]
Press pad twice, SoilA (for average soil) will
replace SoilL.
Press pad three times, SoilH (for heavy soil) will
replace SoilA.
NOTE: You can scroll through all 3 settings
(SoilL, SoilA and SoilH) continuously by pressing
SELECT CLEAN.
2. Press START/ENTER.
PRESS
(example shows light soil
setting)
YOU SEE
3,
After the SELECT CLEAN Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
YOU SEE
4,
Press any pad to remove "End" and bring back
time of day; or open door, at which time "door"
will be displayed. Then close door and time of
day will appear in display window.
YOU SEE
(when pressing any pad)
YOU SEE
28
(when opening the door)