How To Use The Supplied Velcro Tapes; Specifications - Sony IFU-HS1 Manual De Instrucciones

Input signals and input select of the
VPL-HS1
Video input connectors on
the IFU-HS1 (color of
each plugs)
VIDEO 1 S VIDEO
IN connector (black
or yellow)
VIDEO
connector
(yellow/red/
white)
VIDEO 2 Y P /C P
B B R
IN connector
(green/blue/red)
VIDEO 3 S VIDEO
IN connector (black
or yellow)
VIDEO
connector
(yellow/red/
white)
Exemple: To view the picture output from
the S VIDEO connector of the IFU-HS1 on
the projector, display the indication "S
VIDEO 2" on the screen by pressing INPUT
on the remote commander repeatedly.
4
GB

Specifications

Input select of
the Projector
VPL-HS1
S VIDEO 2
VIDEO 2
/C INPUT A
R
S VIDEO 2
VIDEO 2
How to Use the Supplied
Velcro Tapes
Two sets of the Velcro tapes are supplied
with the IFU-HS1 for fixing it on the TV.
Use them if necessary.
Positions where the Velcro tapes should
be attached
1
Attach the Velcro tapes on the two
positions on the bottom of the IFU-
HS1.
2
Put the Velcro tapes on the position
you want to set the IFU-HS1, such as
on the TV.
3
Fit both the Velcro tapes to fix the
IFU-HS1.
When you attach the Velcro tapes, remove
any dust from the surface of them.
Specifications
Dimensions: 230 × 90 × 50 mm (without the
cable) (W × D × H)
Mass: Approx. 310 g (10 oz)
Supplied Accessory:
Multi cable 10 m (length), Velcro
tapes (2 sets; 4 pieces)