How To Use - Sony IFU-HS1 Manual De Instrucciones

Ocultar thumbs Ver también para IFU-HS1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
• If your DVD player is equipped with a D
connector, use a D connector component
video cable (D connector y pin jack × 3
(Y(Green)/P
(Blue)/P
B
• If your video equipment is not equipped
with S VIDEO connector, connect a video
cable to VIDEO connector on the VIDEO
1 IN.
• There is no audio output connector on the
IFU-HS1. Connect an external speaker via
an audio amplifier, etc.
1
Connect the video equipment, DVD
player or game equipment, etc. you
want to connect to the IFU-HS1.
Remove all cables connected to the
input connector of the TV, and then
reconnect them to the video input
connectors (VIDEO 1 IN, VIDEO 2
IN or VIDEO 3 IN) of the IFU-HS1.
Example: Connect the video
equipment to VIDEO 1 IN, DVD
player to VIDEO 2 IN or the game
equipment to VIDEO 3 IN as shown in
the illustration.
2
Connect a TV to the IFU-HS1.
Using the supplied audio/video cable,
connect the input connector of the TV
and the output connector (TV 1 OUT )
of the IFU-HS1.
3
Connect the projector to the IFU-HS1.
Using the supplied PJ Multi cable,
connect PJ MULTI input connector of
the projector and PROJECTOR OUT
connector of the IFU-HS1.
(Red)).
R
Basic Connection and Usage of the IFU-HS1

How to Use

How to operate the IFU-HS1 to view the
picture on the TV or projector is described
below.
1
INPUT
1
2
Front of the IFU-HS1
INPUT
SIDE
SHOT
VOLUME
+
+
INPUT
MS SLIDE
Remote commander
APA
supplied with the Projector
VPL-HS1
1
Press INPUT 1, 2 or 3 to select the
input you want to project on the TV or
projector.
Display the indication of the input you
want.
2
Using the TV/PROJECTOR
(OUTPUT) switch on the front of the
IFU-HS1, select the output to the
projector or TV.
To view the picture on the TV:
Set the TV/PROJECTOR (OUTPUT)
to the TV.
To view the picture on the
projector:
Set the TV/PROJECTOR (OUTPUT)
to the projector.
In this case, go to step 3.
3
Press INPUT repeatedly on the remote
commander supplied with the LCD
Video Projector to switch the input of
the projector by referring the
following table.
2
OUTPUT
3
TV PRPJECTOR
3
3
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido