Camera Installation - Furrion Vision S Manual De Instrucciones

Installation
● Mount camera at least 2 inches
above or below running lights.
Close proximity to lights may
cause image blooming, blurring
and reduced night vision
performance.
● The area should be flat with
enough surface area to
accommodate the bracket.
● The surface area should be
clean and dry for a watertight
installation.
● Ensure that power can be fed to
the installation area from within
the vehicle.
Camera
15

Camera Installation

1. Select a suitable mounting
position where you are going
to install the doorway camera.
Mark a basic outline using the
provided bracket gasket. (Fig. 1)
Fig. 1
2. Drill a 5/8" center hole on the
vehicle wall using a 5/8" hole
saw. (Fig. 2)
Camera
Fig. 2
⁵⁄8"