Battery Management; Wi-Fi Network Settings - Primux BASIC 7 Manual De Usuario

.
turns into
☆ ☆ ☆ ☆
You can use USB cable to charge the device.
☆ ☆ ☆ ☆
You can use the device while charging; however, it will extend the
charging time.

Battery management

The battery electricity isn't full when it is packed. It is recommended to
charge at least four hours before using the device.
The charging time and discharging time of the battery are limited. However,
you can try the following measures to extend the life of the battery.
● Use the device at least once every week.
● Charge the battery regularly.
● Do not keep the battery too low for long time.
● Always keep the device and battery away from heat source.
Start-up
Press and hold the power switch for four seconds.

Wi-Fi network settings

Since many functions require Wi-Fi connection, please configure the
Wi-Fi network before operation.
1. Click
2. Select to turn on Wi-Fi.
The device will automatically scan and list all available Wi-Fi networks.
If the Wi-Fi connection has
password.
3. Tap a Wi-Fi connection → if password is required, please enter the
valid password → tap Connect, and the
desktop after connecting to Wi-Fi network.
4. Tap
☆ ☆ ☆ ☆
If you set to hide Wi-Fi, it won't be scanned automatically. Please tap
Add Wi-Fi Network, and then enter corresponding information to add
the Wi-Fi.
3G network settings
1. To connect to 3G network, please select the 3G Doogle that the
device supports. The device only supports external USB 3G Doogles.
→ Wireless and network.
to return to the desktop.
icon, you need to enter the valid
40
icon appears on the