Locking Desktop - Primux BASIC 7 Manual De Usuario

☆ ☆ ☆ ☆
Tap and hold the icon to drag and drop to other position on the screen.
☆ ☆ ☆ ☆
Tap and hold the icon to drag and drop to
from the desktop.

8. Locking desktop

If the PC won't be used for a long time, or the power switch is tapped, the device
enters standby state. The standby has two states. One is deep-sleep standby, in
which the screen is turned off; the other is light standby after pressing the
power switch. The picture shows the default light standby state. Tap and hold
the unlocking switch
point A is the camera icon and point B is the unlocking icon. The system will
prompt about the path of unlocking. The ripple at point B in the picture is the
path of the prompt. Tap and drag the unlocking switch to point B to unlock the
screen, tap and drag the unlocking switch to point A to activate the camera
function.
A
, and the A, B symbols as shown in the picture appear;
43
to delete
B