BOLTUNE BT-BH024 Guia Del Usuario página 10

Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode
with the LED indicators flashing quickly in white.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find "Boltune BT-BH024" (for the left earbud) or
"Boltune BT-BH024 R" (for the right earbud) in the searching results, tap
on the name to connect.
Note:
If you want to change to couple mode, simply take out the other
earbud from the charging case, they will pair with each other
automatically.
ENGLISH / 09
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. Uncover the lid.
2. Press and hold the Power Button on the back of the charging case for 10
seconds until the LED indicators flash white three times.
3. If you have paired your device with the earbuds before, remove
"Boltune BT-BH024" and "Boltune BT-BH024 R" from the Bluetooth device
list and pair again.
4. Re-pair with your Bluetooth® device as instructed in "Pairing" section.
Note:
If you want to pair the earbuds with another device when you
have already paired them with a device, deactivate the Bluetooth
function on the paired device or clear "Boltune BT-BH024" and "
Boltune BT-BH024 R" from its Bluetooth list. Restore the earbuds
to factory settings as instructed above if pairing failed.
ENGLISH / 10