Operation And Functions - BOLTUNE BT-BH020 Guia Del Usuario

on the name to connect.
4. Once connected, the LED indicator will flash blue slowly.
Note:
If you want to change to couple mode, simply take out the other earbud
from the charging case, they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. Uncover the lid.
2. Take out one of the earbuds , press and hold its Multifunction Button for 5
seconds to turn it off. When it is off, press and hold its Multifunction Button
for 10 seconds until the LED indicator stays solid white for 3 seconds then
off. Place it back into the charge case.
3. Take out the other earbud, press and hold its Multifunction Button for 10
seconds until the LED indicator stays solid white for 3 seconds then off.
place it back into the charging case.
4. Close the lid then uncover the lid to pair again.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear "Boltune BT-BH020" from its Bluetooth list. Restore the
earbuds to factory settings as instructed above if pairing failed.
07

OPERATION AND FUNCTIONS

Function Operation
Answer Phone Call Press the Multifunction Button on either of the
earbuds once
Hang up Phone Call Press and hold the Multifunction Button on
either of the earbuds for 2s
Reject Incoming Call Press and hold the Multifunction Button on
either of the earbuds for 2s
Previous Track Press the Multifunction Button on the left
earbud three times
Next Track Press the Multifunction Button on the right
earbud three times
Play / Pause Press the Multifunction Button on either of the
earbuds twice
Volume -
Press the Multifunction Button on the left
earbud once
Volume + Press the Multifunction Button on the right
earbud once
Turn On / Off Voice Control When the earbuds are paired with your device
successfully, press and hold the Multifunction
Button on either earbud for 1.5s until a beep
is heard
Redial Press the Multifunction Button on either of the
earbuds three times in non-music playback state
08