New Bee M50 Instrucciones Del Producto página 4

CHARGING port ⑥
- This product uses lithium-ion polymer batteries, for first time using, it
needs about 3 hours for fully charged (charging voltage: 5V, current:
0.5~2A).
- The charging light is red when charging, and it will turn blue when the
headset is fully charged.
- When under charging, the headset will automatically power off itself; do
not use the product while charging.
IV. HEADSET CONNECTIONS
(1) After the headset is turned on, automatically enters pairing mode
after 7s, and the Bluetooth Led indicator will flash red and blue
alternately.
(2) Activate the Bluetooth function of mobile phone or other Bluetooth
devices:
- For iPhones: open "Settings" > choose "Bluetooth" > turn it "On" >
connect "M50" .
- For Android phones: open "Settings" > choose "Bluetooth" > search
for new devices > connect "M50" .
* NOTE: The contents of the menu may be different for different devices.
(3) After the "M50" is successfully connected to phones or devices, the
Bluetooth LED indicator will disappear.
(4) Two phones connection
This headset can connect to two Bluetooth devices together.
Step1, Turn on the headset and open Bluetooth function on phone A,
connect to "M50" , then close the Bluetooth function on phone A;
Step 2, Connect Phone B with "M50" as step 1;
Step 3, Keep Phone B connecting and then re-open Bluetooth on Phone
A and connect to "M50" .
*NOTE: Although two phones are connected to the headset at the same
time, they can only play music from one of them rather than two phones.