Product Features; Technical Parameters - Vision-EL 6108 Instrucciones

®

Product Features

This product is a 433MHz frequency wireless remote control. It can control specified
433MHz series smart lights with color changing, color temperature, saturation and
brightness adjustable.

Technical Parameters

Voltage: 3V(AAA x 2PCS)
Transmitting Power: 10dBm
Standby Power Consumption: 16uA
RF: 433MHz
Control Distance: 50m
(Lamps 0.5m underwater)
Size: 197,5mm x 47mm x 19mm
Products Key Diagram
Indicator light
Saturation / CCT Control
White light
Master ON
Speed- /
60s Delay OFF
" " Zone ON
(Link/Unlink)
Touch the color ring to change colors.
Under white light mode, adjust color temperature.
Under color light mode, change color saturation.
Slide the brightness sliver to adjust the brightness.
Press the button to get white light.
Touch ON button, turn on the linked device.
Touch OFF button, turn off the linked device.
Dynamic mode switching button.
Short press: Lower the dynamic mode speed.
Long press under static mode, lamp will blink one time into 60s Delay OFF mode.
Short press: Accelerate the dynamic mode speed.
Long press under static mode, lamp will blink one time into 10min Delay OFF mode.
/ This product is guaranteed against any manufacturing defect for a period of 2 years. / Este producto está garantizado contra cualquier defecto de fabricación por un período de 2 años.
/ Questo prodotto è garantito contro qualsiasi difetto di fabbricazione per un periodo di 2 anni. / Dieses Produkt wird für einen Zeitraum von 2 Jahren gegen Herstellungsfehler garantiert.
NOTICE - INSTRUCTIONS - INSTRUCCIONES - AVVISO - BEKANNTMACHUNG
24mm
53mm
47mm 19mm
Antenna
Color Ring
Brightness Dimming
Master OFF
Speed+ /
10min Delay OFF
Mode
"O" Zone OFF
MIIDEX LIGHTING - 1 rue Isaac Newton 31830 Plaisance du Touch - www.miidex.com
Ce produit est garanti contre tout défaut de fabrication pendant une durée de 2 ans.
Grouping of several lights
You can add an endless numbers of lights to a zone on the 8 channels remote by
linking the lights to different zones. This way you are completely flexible in creating
different group combinations. Below you can see some grouping examples.
Light 1 Light 3 Light 1
Light 5
Light 2 Light 4 Light 2
Remark:
1. The user can re-programme freely as needed. One remote can control countless
lamps or controllers, but one lamp or controller can only be controlled by four
remotes (Max).
2. Please check the battery installation and controller (totally discharge the power),
when you programme after switching and switching on.
Linking&Unlinking
Remark: The light can be working after linking with the remote controller.
Linking Instructions
Power
Link/Unlink
button
Switch off the light, When the light on, short press
after 10 seconds any zone of "
switch on again 3 seconds
If the light not blink slowly, the linking failed, pis switch off the light
again, and follow the above steps again.
Unlinking Instructions
Power
Link/Unlink
button
Switch off the light, When the light on, short press
after 10 seconds " 5 times within 3 seconds
"
switch on again
If the light not blink quickly, the unlink failed, pis switch off the light
again, and follow the above steps to unlink again.
Attention
1. In the using of the remote, if the indicated lamp blinking quickly, pls change the
battery in time. Pls don't use poor quality battery to avoid the leaking of battery
liquid to damage the remote controller.
2. This 433MHz remote control system is precise electronic product, don't use it in
humid, high temperature, dust and high voltage environment. Saving it at indoor, dry
and no static electricity environment.
3. Pls don't use the remote controller on the wide-range metal or strong electromagne-
tic wave area, otherwise, it will badly affect the controlling distance.
Ref : 6108
Light 3 Light 1 Light 3
Light 5
Light 4 Light 2 Light 4
Power
The light blink 3 times slowly
" 3 times within
means the linking is done
successfully
Power
The light blinking 10 times
quickly, means the unlinking
successfully
Light 5