BGS technic 9397 Guia De Inicio Rapido página 2

Crimping Pliers, for Cable Lugs, 6 - 50 mm²
CRIMP DIE SIZE
6 mm² = 10 AWG
10 mm² = 8 AWG
16 mm² = 6 AWG
25 mm² = 4 AWG
35 mm² = 2 AWG
50 mm² = 0 AWG
ATTENTION
Read the operating instructions and the included safety information carefully before using the product.
Use the product correctly, with caution and only for the intended purpose. Failure to observe the
safety instructions can lead to damage, injury and voiding of the warranty. Keep these instructions in
a safe and dry place for future reference. Include the operating instructions if you pass the product on
to third parties.
INTENDED USE
These pliers are made to crimp copper and aluminum cable lugs from 6 to 50 mm²
(AWG 10 to AWG 0). The required size can be easily set on the rotatable, marked crimping jaws.
SAFETY INFORMATIONS
•
Read the operating instructions and the included safety information carefully before using the
product.
•
Keep children and unauthorized persons away from the work area.
•
Do not let children play with this product or its packaging.
•
Make sure that the work area is adequately illuminated.
•
Keep the work area clean, tidy, dry and free of other materials.
•
Do not let untrained people work with this tool set.
•
Always work according to the vehicle manufacturer's instructions. This manual serves only to
illustrate the product and in no way replaces vehicle-specific service literature.
OPERATING
1. Carefully remove the insulation, taking care
that no wires are damaged.
2. Press down the locking bolt and select suitable
crimping dies by turning.
3. Position the crimping die centrally on the cable lug.
4. Squeeze the lever of the pliers and crimp the cable
lug.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crimp die
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9397
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed