PROPER USE
Applications
_ These electrical garden pumps are suitable to use
outdoors (for example in the garden)
_ Irrigation and watering of green areas, vegetable
beds and gardens.
_ Operation of lawn sprinklers.
_ Drawing of water (with pre-filter) from ponds,
streams, rain barrels, rainwater cisterns and wells.
Transport media:
_ For the pumping of clear water (fresh water),
rainwater or light suds/service water.
_ The maximum temperature of the fluid must not
exceed +35°C if the equipment is operated
permanently.
_ Do not use the equipment to pump inflammable,
gassing or explosive fluids.
_ The pumping of aggressive liquids (acids, alkalis,
silo seepage etc.) as well as liquids with abrasive
substances (sand) must likewise be avoided.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
SPECIFIC SAFETY WARNINGS
This water pump has no water-sprinkling
protection feature and should be placed only in a
dry environment. Never place the water pump or
operate it in the rain or in a humid space.
This water pump should not be used with
flammable or harmful liquids.
Idle operation of the water pump must be
avoided.
This water pump is for work in clean water. The
scope of its application includes irrigation in the
garden, water supply to a household, sprinkling in a
garden or on farmland.
This water pump may not be exposed for long
periods to impurities, sand, stone, sticky
substances, etc., mixed in with the conveyed media.
Because the conveyed media may contain chemical
corrosive substances, it is necessary to pay special
attention to preventing influence by these on the
material of the pump body. It is not permitted to use
this water pump to convey drinking water.
This appliance cannot be used by
developmentally impaired, or
people who lack experience or
knowledge, except in case these
people receive instruction from a
person responsible for their
instructions concerning use of
ASSEMBLY
During the installation of the water pump, the
power supply to the water pump must be switched
off.
During installation of the equipment, it is
necessary to keep it under dry and well-ventilated
conditions, at an ambient temperature below 40°C.
If the required pumping water is excessive due to
your own action, resulting in flooding of the irrigation
site, a number of protective measures may be taken
(e.g. installation of a device for discharging the
excess water, an alarm, standby pump, water
container, etc.). However, our company is not
responsible for any losses thus caused.
Before use, the water pump should be inspected
for safety to ensure that there is no damage to the
power cable or the plug.
Electrical connection
The electrician responsible for installation must
check to ensure that the electrical connection is in
accordance with the standard, including the earth
terminal.
It is necessary to check the rated current of the
electric contact with protective switch - this must be
30mA.
Earth
The water pump must be well earthed. Short-
circuiting will render the relevant articles of the
guarantee invalid. If it is necessary to increase the
length of the original cable, a cable with the same
section as the original cable must be used.
18
children or people who are
physically, mentally or
safety, a supervisor, or by
studying the preceding
this appliance.