Thermal Protector - Brandani 59079 Manual De Instrucciones

UNPACKING AND INSTALLATION INSTRUCTION
Warning:
1. 1.the product must be connected to the ground
2. 2.the fireplace must be used under the AC voltage rating
3. 3.Before the power on, do read the safety warnings and product installation instructions.
CONTROL SWITCH
Four switches and four buttons provided on the product function selection (as shown in figure).

THERMAL PROTECTOR

Vibration High
When the outlet is closed, thermal protection automatically disconnected because of overhea-
ting. After cooling the motor restarts. If the thermal protector constantly disconnect, the fireplace
should be turned off and contact the vendor.
8
Low Switch on/
off
Switch on/
2000W 1000W
off