Publicidad
Step 14
Flip the drawer over onto the LARGE LEFT DRAWER SIDE (D138).
å
Insert a SLIDE CAM (DD) into the LARGE RIGHT DRAWER SIDE (D132).
å
Diagram 1. Insert the tabs on a DRAWER ACTUATOR (HH) into the slots
å
in a RIGHT DRAWER SLIDE (40CC). You may need to insert one tab fi rst,
then the other.
Diagram 2. Visually check that the DRAWER ACTUATOR (HH) is seated in
å
the SLIDE (40CC).
Diagram 3. If the DRAWER ACTUATOR is not seated, use your hammer to
å
gently tap the SLIDE until the tabs are properly seated in the slots.
Now, fasten DRAWER RIGHT (40CC) to the LARGE RIGHT DRAWER
å
SIDE (D132). Use two GOLD 5/16" FLAT HEAD SCREWS (TT) through
holes #1 and #4.
Repeat steps 13 and 14 for the other drawers.
å
Slot
1.
40CC
HH
These tabs must insert into the slots.
2.
HH
www.sauder.com/services
D132
Post
HH
D132
Seated
1
2
4 3
D138
3.
409714
TT
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line
up the hole in the SLIDE with
the hole in the DRAWER SIDE.
DD
Page 19
Publicidad
