SETTING UP YOUR SYSTEM continued
Plug the AC adapter into the mains and then into the radio's AC
14VAC socket.
PREPARING THE REMOTE FOR USE
The remote uses a CR/DL2025 battery. Insert it into the battery
holder with the writing facing opposite to the writing on the remote.
Replace the battery when it no longer works. Pull out the plastic tab
to activate the remote.
TURNING THE RADIO ON
Press the STANDBY button
SELECTING PLAY MODES
Press the MODE button on the radio or the remote to select UDISK,
SD/MMC, AUX or TUNER.
ADJUSTING VOLUME
Use the
VOL
unit.
PLAYING AM OR FM
Use the MODE button to select TUNER, then select AM/FM with the
remote's AM/FM button or the BAND button or the BAND button
on the unit. Tune using the tuning buttons
remote. A quick, short press tunes individual frequencies; a longer
press of 1 second engages auto tuning, which tunes only to stations
of strong signal strength.
on the radio or on the remote.
buttons on the remote or the volume knob on the
SOUND 110
OWNER'S MANUAL
on the radio or the
3