Kohler Sterling 11406 Guia Del Usuario página 4

Turn the brackets
parallel to the sink rim.
Mounting Bracket
Countertop Opening-
Bottom View
3. Install the Mounting Brackets
NOTE: The type of fastener is dependent upon the countertop
material and should be recommended by the countertop supplier.
Equally space and mark bracket mounting hole locations around
the cutout. Make sure the mounting holes are positioned 1-3/8"
(3.5 cm) +/- 1/4" (6 mm) from the edge of the cutout.
Choose an appropriate fastener based upon the countertop
material being used (not supplied - contact a local countertop
supplier).
With the correct fasteners, loosely attach the mounting brackets to
the previously marked locations as shown in the illustration. Do
not fully tighten the mounting brackets at this time.
NOTE: Be sure the ends of the mounting brackets bend up toward
the underside of the countertop.
Turn the mounting brackets until they are parallel to the opening
as shown in the illustration.
1041809-2-H
Insert (Not Furnished)
Edge
Countertop
Opening
Mounting
Bracket
1-3/8" (3.5 cm)
Fastener
+/- 1/4" (6 mm)
(Not Furnished)
Countertop
Sealant
Mounting
Fastener
Bracket
(Not Furnished)
4
Sink
Sterling