Setting Time And Date - auna multimedia 10027920 Manual De Instrucciones

The first time you plug your unit in, the clock on the display will show "0:00". The clock will automatically set
when you first tune in any DAB station. Nevertheless, if there is no DAB station available, the clock may be
set manually via the MENU system. To set the time and date manually:
• Switch on the unit, press and hold INFO/ MENU for 2 secs to enter MENU mode.
• Turn the TUNE knob then enter "Set Time/Date" by following path: Main menu > System setup > Time
setup > Set Time/Date
• Each step need to press Select, you will enter to below interface on display.
• Turn the TUNE knob to set the hour, then press to con¬firm.
• Turn the TUNE knob to set the minute, then press to confirm.
• Follow the same routine to set the date.
For optimal reception, fully extend the antenna and adjust its position. You can store a maximum of 10 FM
radio stations.
• Press the FUNCTION button on the device or FUNC on the RC to select FM mode.
• Press PAIR/ SCAN. The unit will automatically start searching radio station. When a station is found it
will stop searching and you will hear the station.
• If the station needs to be ¬fine tuned to ¬ensure the best reception turn the TUNE knob. Each turn will
change the radio frequency by 0.05MHz
The radio will search and the tuning frequency will be displayed whilst searching. When a useable station is
detected the radio will stop tuning and play the station. If RDS data is present, the station name and scrol-
ling radio text will be displayed. If RDS data is not present, display will show [ No Radio Text ].
Stereo/Mono reception
You can set your unit to switch between Auto and mono FM reception. Press and hold ST / MO to select
audio mode "Auto" (turns to Stereo signal automatically upon receipt) or Mono.
Storing radio stations (FM) (store up to 10 preset stations)
• Search for a station you want to store and then press and hold PROG / PRE button.
• Display will show „Preset Stored" , turn the TUNE knob to ¬find the preset number (1-10) which you
want to store
• The display will show (Empty) if no station is stored on the particular slot.
• Press SELECT to confi¬rm if you want to store the station in the displayed preset number.
• To listen to stored stations, press PROG/PRE to recall 1-10. Press SELECT to play the preset selection.
16
Operation

Setting Time and Date

FM Radio