Placing And Leveling - LG WFS1918EKD El Manual Del Propietario

26
P
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
We suggest a minimum clearance of 2 cm to the
Place the machine on a flat and firm surface which allows proper clearance.
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is
suggested.
NOTE
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
spin failure or "UE" error can happen to it.
It must be placed on a firm and level floor to prevent spin failure.
2
Open the lid and look from above to see if it is
Check that the machine is level
same as shown.
3
Lift the front of the washing machine and twist
Leveling the machine
the Adjustable Leg.
※ Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or
front of washing machine and screw it
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
BACK
more than 10 cm
more
than
2 cm
Top view of the machine
Adjustable legs
SETTING SCREW (2pcs)
ANTI-RAT COVER
more than
2 cm