EASYHOME MD 16941 Manual Del Usuario página 15

− Do not touch the bottom of the cleaner foot during
operation.
NOTICE!
Risk of damage.
Surfaces can get damaged.
− Do not use the fl oor cleaner foot without the cleaning cloth
or with the carpet glider.
− Do not use on untreated wooden fl oors. When cleaning
heat-sensitive fl oors, e.g. linoleum or similar surfaces, do
not allow the steam to penetrate one part of the fl oor for
too long.
− If in doubt, consult a fl ooring specialist to check whether
your fl oor can be steam-cleaned.
1. Connect the appliance to an outlet.
2. Turn the steam jet control
Always set the steam jet control to the maximum setting in the heating-up
phase in order to be able to produce enough steam.
3. Press the on/off switch
4. The appliance starts heating up and the operating light
It will take about 25 seconds for the appliance to heat up.
5. Turn the steam jet control
6. Switch the product off after use by pressing the on/off switch again and pulling out
the mains plug
Your steam cleaner may leave lime spots on the fl oor after some time.
Limescale can be removed with a few drops of household vinegar or a
descaling product (follow the instructions of the fl oor covering manufacturer).
5
clockwise to the maximum setting.
2
.
5
to the required setting.
9
.
Using the steam cleaner
5
lights up.
15