Storing The Appliance; Troubleshooting - EASYHOME MD 16941 Manual Del Usuario

7. Then fi ll the water tank with clean water and allow the appliance to generate steam
until the water tank is empty.
Descaling the water tank
Follow the instructions below to remove limescale from the tank:
1. Remove the water tank from the appliance.
2. Fill the tank with water and add one to two tablespoons of vinegar.
3. Close the water tank and shake well.
4. Leave the solution for a few hours in the tank in order to loosen the limescale.
5. Then empty the water tank and rinse it out thoroughly with water.

Storing the appliance

1. Switch off the steam cleaner. Unplug the appliance after use.
2. Allow the appliance to cool down.
3. Empty the water tank and rinse it out once with clean water.
4. Remove the cleaning cloths. Wash them if necessary or leave them to dry.
5. Leave the steam cleaner to dry.
6. Wind the power cord on the cord holders.
7. Store the appliance in a dry location.
The handle can be folded down again for transport or storage (see Fig. F).
− To do this, press the two buttons
− Carry the appliance using the handle provided

Troubleshooting

If the appliance malfunctions, please check fi rst if you can remedy the problem yourself
with the help of the following hints.
Never try to repair the product yourself. Please contact our customer support center or
another technician if a repair is necessary.
Problem
The steam cleaner is
not working
The steam power is
reduced
The cleaning cloths
are too wet.
12
− Check the power cord/outlet.
− Press on/off switch.
− The steam outlets are blocked. Disconnect the plug.
Remove blockage using the cleaning tool.
− Disconnect the plug. Allow the appliance to cool down.
Remove the cleaning cloth. Wring it out or use a new
cleaning cloth.
− Allow the appliance to heat up for 25 seconds after
switching it on.
and fold down the handle.
4
.
Rectifi cation
Storing the appliance
17