Di4 Jet Pressing Smartcare Manual Del Usario página 23

TROUBLE SHOOTING
Problem
The iron begins to smoke
when switched on.
The iron does not produce
any steam.
Dirt comes out through the
soleplate.
The "Calc'nClean" indicator
light (1) does not turn off.
The appliance makes a
pumping sound.
The iron produces little
steam.
If the above tips do not solve the problem, get in touch with our customer service.
Possible causes
During first use: certain components
on the appliance have been lightly
greased at the factory and may
produce a small amount of smoke
when initially heated.
During first use, water has not
filled the hose (4) completely.
The "Calc'nClean" indicator light (1)
will flash. The descaling process has
not been completed.
There is a build-up of lime scale or
minerals in the iron.
Chemical products or additives have
been used.
The iron descaling process has been
stopped before being completed.
Water is being pumped into
the iron.
The water tank is empty.
O ferro de engomar foi ligado há
pouco tempo.
Solution
This is completely normal and will
stop after a short while.
Press and hold the steam release
button (13) until steam comes out.
Perform a cleaning cycle (see the
"Descaling process" section).
Execute um ciclo de limpeza
(consulte a secção "Processo de
descalcificação").
Never add products to the water (see
the "Filling the water tank" section).
Clean the soleplate with a
damp cloth.
Restart and complete the iron
descaling process.
This is normal.
Fill the water tank.
It is normal, the iron produces steam
gradually until it is stabilized.
23