Escutcheon
Apply
plumbers
putty.
Gasket
1. Install the Escutcheon
NOTE: For single-hole lavatories, the escutcheon, space and gasket
are not required. Use the rubber washer only.
For Three-Hole Lavatories
Installation to marble or plastic: Do not use plumbers putty.
Remove the backing from the gaskets and firmly press them over
the two outside lavatory holes.
Installation to any other material: Place a bead of plumbers
putty around the underside of the escutcheon according to the
putty manufacturer's instruction.
Position the spacer over the center lavatory hole with the gasket
surface down.
Position the escutcheon over the three lavatory holes.
Discard the washer supplied with the faucet.
Kohler Co.
Spacer
For Three-Hole Lavatories
3
1002277-2-C