logitrans LT 1001 Manual De Instrucciones página 5

Battery and charger
Battery indicator 24V
The messages are shown on the LCD display.
Charging diode
Battery condition diodes:
Red (diode): Charging.
Orange (diode): Charging is recommended
Green (diode): Ready to operate
LCD display:
0-30%: Charging is recommended
0%: Charging has to be made.
Shortly after the indication of 0% on the display and flashing red diode, the driving
speed is reduced (display shows error 4.2). The battery has to be charged!
Battery condition is updated when fully charged and when driving function is
activated.
When turning on:
The LCD display carries through a check that all diodes are working. The LCD
display indicates number of operating hours for some seconds, before changing to
show battery condition.
Error codes
In case of errors, the display shows error codes:
Error code 1.4: The forward/reverse knob is activated, before the handle was
placed in drive position.
Error code 4.2: Battery discharged.
If the display shows other error codes, please contact your dealer.
Standby:
When display is in standby mode, stars are shown in the display. When activating the
driving function, battery condition is indicated (not hour meter and operations hours).
Red (diode): Indicates service and error - see error
code in LCD display.
LCD display (8 characters)
Battery condition diodes:
Red, orange and green
5