Publicidad
With
(1.5), introduce the exact value of TDS according to the TDS standard value
chart.
Press ENTER (1.2), the equipment automatically calculates and saves the TDS conver-
sion factor value and returns to the measuring mode.
If CANCEL (1.3) is pressed, the equipment returns to the measuring mode without cal-
culating the conversion factor value.
Data saving
In the Conductivity, TDS or Salinity measuring mode press SAVE (1.11); the equipment
automatically saves the current measured value.
T=25.0 ºC
100.0
uS / cm
SAVE
NO.12
Nahita conductivity meter 910/8 can save up to 50 data in each measuring mode.
Note: If memory is full, the equipment keeps saving data but deletes the previous data
starting from the beginning.
Visualization of the saved data
To view the list of the data saved in each measuring mode, proceed as follows:
Select the measuring mode whose data are going to be visualized.
Press VIEW (1.10); the total number of data saved in that measuring mode will be
shown and the 3 first data will be displayed.
Cond. saved datum:3
1
25.1
100.0
uS / cm
2
25.0
100.0
uS / cm
3
25.0
100.0
uS / cm
DEL
PRESS
Use
(1.5) to see in turn all the saved data. Note: Only 3 data will be displayed at
once.
To exit the visualization mode, press CANCEL (1.3).
Page 32
Instruction manual 50910080
ENGLISH
Version 1 June-07
3. ESPECIFICACIONES TÉCNICAS
Referencia
Conductividad:
Rango
Resolución
Precisión (± 1 dígito)
Sólidos totales disueltos (TDS)
Rango
Resolución
Precisión (± 1 dígito)
Salinidad
Rango
Resolución
Precisión
Rango temperatura
Revisión 1, Junio-07
Manual de instrucciones 50910080
CASTELLANO
50910080
μ
0-1.999
S/cm
μ
2.00-19.99
S/cm
μ
20.0-199.9
S/cm
μ
200-1999
S/cm
2.00-19.99 mS/cm
20.0-199.9 mS/cm
μ
0.001
S/cm
μ
0.01
S/cm
μ
0.1
S/cm
μ
1
S/cm,
0.01 mS/cm
0.1 mS/cm
± 0.5%
0-10.00 mg/L
10.0-100.0 mg/L
100-1000 mg/L
1.00-10.00 g/L
10.0-19.9 g/L
0.01 mg/L
0.1 mg/L
1 mg/L
0.01 g/L
0.1 g/L
± 0.5%
0.0-80.0 ppt
0.1 ppt
± 1 ppt
-5/105 ºC
Pág. 5
Publicidad
