Urmet mikra plus Manual De Configuración página 20

B.5 Use the terminal to detect the buttons panel among the available WiFi networks. The name, depending
on the model, is:
- URMET_1784_3_XXXXXXXXXXXX (for Mikra Plus 4-button panel Ref. 1784/3)
- URMET_1784_4_XXXXXXXXXXXX (for Mikra Digital push button panel Ref. 1784/4)
Numbers XXXXXXXXXXXX indicate the MAC ADDRESS of the device shown on the back of the
button panel. It is not possible to connect to the WiFi access point with several terminals at the
same time, as only one terminal at a time is recognised and connected.
B.6. Select the WiFi network to connect to the WiFi access point.
When the connection is complete, the following screen appears on the display:
Ref. 1784/3
User connected
The device remains in this state until control
TRANSFER
B.7. Start the QR code reader app and scan the QR code below with the camera of your terminal or start the
browser present on the terminal and enter the IP address 192.168.4.1 in the address bar.
On some terminals it may be necessary to disable the network data of your terminal to access the
configuration web page of the device.
B.8. The SETTINGS
20
web page on the terminal are selected (see § B.9).
http://192.168.4.1.
web page will open.
Ref. 1784/4
User connected
or the control on the
DS1784-003