Ending Of Work - MS Schippers MS Greenline Instrucciones De Uso

1. Install the Overflow valve between the Greenline and the hose to the pressure cleaner and make
sure the Greenline is installed completely, including the foam lance.
2. First, close the Overflow valve completely with the messing valve and open the blue handle
(ON).
3. Test the Greenline on the foam side (blue side); when there is a good foam image (check movie
foam image) and the pressure cleaner keeps working constant, it's ok and you can test the
yellow side with disinfection. If not, go on with step 4.
4. Keep foaming with the lance, while slowly turning the messing valve open, step by step, and
leave the blue handle on ON. See how the foam image changes and stop turning when you
have a good firm foam AND the pressure cleaner keeps working constantly and stays within his
operating pressure. From this moment the Overflow valve is set correctly and you can open and
close it with the blue handle.

Ending of work

Coarse outer soiling has to be removed using clear water.
▪
After cleaning the double injector MS GREENLINE and its service pipes switch off the high
▪
pressure generator unit.
Reduce the pressure in the entire system by opening the gun.
▪
Keep the portable foam unit in a frost-free place.
▪
Maintenance
Check the complete machine regularly, especially the connections between the single
▪
components in order to detect damages. Perhaps screws have to be retightened in order to
guarantee the best suction.
At least once a year it is necessary to check all wearing parts of the complete machine
▪
In order to guarantee the function of the nonreturn valves during the operation it is necessary to
▪
check the valves. They have to be cleaned when they are dirty. Damaged nonreturn valves have
to be replaced and defective o-rings have to be changed.
Repairs may only be carried out by authorized and qualified staff.
▪
Only use original spare parts.
▪
For further questions, spare parts or advice, please contact our customer service.
21