Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be taken, including the following:
READ ALL INSTRUCTIONS.
1.
Unplug from outlet when not in use, before
2.
assembling or disassembling, and before cleaning.
3. To protect against risk of electrical hazards, do not immerse the
Waring
Commercial Power Grinder in water or other liquids.
®
4. Avoid contact with moving parts.
5. Do not operate the Waring
any electrical equipment with a damaged cord or plug, or after
the unit malfunctions, is dropped or damaged in any manner.
If damaged, immediately stop use. Do not operate the Waring
Commercial Power Grinder or any electrical equipment with
a damaged cord or plug, or after the unit malfunctions, is
dropped or damaged in any manner. If damaged, immediately
stop use and return appliance to the nearest Waring Authorized
Service Facility for examination, repair or adjustment.
6. Children shall not play with the appliance.
7. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch
hot surfaces.
10. Check hopper for presence of foreign objects before using.
11. Use only attachments that are included in the packaging of
the Waring
®
Commercial Power Grinder. The use of other
attachments may cause re, electric shock or injury.
12. Put this instruction booklet in a safe place; do not discard.
13. Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
14. When operating for long periods of time, the grinding bowl can
become hot. Please use caution when handling the bowl.
wsg60ek_15wi013755_ib_final.indd 2-3
Commercial Power Grinder or
®
2
CAUTION:
15.
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off by
the utility.
16. Switch off the appliance and disconnect from supply before
changing accessories or approaching moving parts.
SAVE THESE INSTRUCTIONS
APPROVED FOR ONLY HOUSEHOLD USE
®
3
9/24/15 12:11 PM
Publicidad
Tabla de contenido
