Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0000
30-0005
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1385
ITEM
QTY
1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
SPACER TUBE
5
2
1/2-13 X 2.00" HEX HEAD BOLT
6
2
1/2" FLAT WASHER
7
2
1/2" LOCK WASHER
8
2
M14-1.50 X 100MM HEX HEAD BOLT
9
2
9/16" FLAT WASHER
10
2
9/16" LOCK WASHER
11
2
M8-1.25 X 65MM HEX HEAD BOLT
12
2
5/16" FLAT WASHER
13
2
5/16" LOCK WASHER
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE (2) Y EL CONDUCTOR (3)
4
2
TUBO SEPARADOR
5
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
6
2
ARANDELAS PLANAS SAE DE 1/2"
7
2
ARANDELAS DE PRESIÓN DE 1/2"
8
2
PERNOS CON CABEZA HEXAGONAL M14-1,50 X 100 MM
9
2
ARANDELAS PLANAS SAE DE 9/16"
10
2
ARANDELAS DE PRESIÓN DE 9/16"
11
2
PERNOS CON CABEZA HEXAGONAL M8-1,25 X 65 MM
12
2
ARANDELAS PLANAS SAE DE 5/16"
13
2
ARANDELAS DE PRESIÓN DE 5/16"
1
1
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE SEPAREMENT)
2,3
2
SUPPORTS, PASSAGER
4
2
TUBE D'ESPACEMENT
5
2
BOULON A TETE HEXAGONALE DE 1/2-13 X 2,00 PO
6
2
RONDELLE PLATE 1/2 PO
7
2
RONDELLE A FREIM DE 1/2 PO
8
2
BOULONS A TETE HEXAGONALE M14-1,50 X 100MM
9
2
RONDELLE PLATE 9/16 PO
10
2
RONDELLE A FREIM DE 9/16 PO
11
2
BOULONS A TETE HEXAGONALE M8-1,25 X 65MM
12
2
RONDELLE PLATE 5/16 PO
13
2
RONDELLE A FREIM DE 5/16 PO
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
STEP 1.
completely before beginning.
CAUTION: Wheels must be supported to support sub-frame to unibody to avoid misalignment for re-
attachment.
Remove factory shield by removing five 8mm bolts and two push type fasteners. Shield will not be rein-
STEP 2.
stalled.
Remove 2 factory 14mm bolts. SEE FIGURE 2.
STEP 3.
Determine passenger and driver brackets.
.
STEP 4
Insert 1/2" fasteners through bracket as shown. SEE FIGURE 1.
STEP 5.
Remove body mount washer from factory 14mm bolt. Position body mount washer back in body mount
STEP 6.
and attach bracket using the supplied M14-1.5 x 100mm bolt, 9/16" flat washer, and lock washer. SEE
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2005-08 HYUNDAI TUCSON
APLICACIÓN: HYUNDAI TUCSON, MOD. 2005-08
APPLICATION: HYUNDAI TUCSON 2005-08
1
CONTENTS - CONTENIDO - CONTENU
(2)
ET CONDUCTEUR
2
(3)
WO:
3
4
TOOLS - HERRAMIENTA - OUTILS
21MM SOCKET
19MM SOCKET
13MM SOCKET
12MM SOCKET
3/4" WRENCH
RATCHET
TORQUE WRENCH
DADO DE 21MM
DADO DE 19MM
DADO DE 13MM
DADO DE 12MM
LLAVE DE TUERCAS DE
3/4"
MANERAL
LLAVE DE TORQUE
DOUILLE 21MM
DOUILLE 19MM
DOUILLE 13MM
DOUILLE 12MM
CLE 3/4 PO
CLIQUET
CLE DE COUPLE
75-0838 REVISION A 8/26/08
Publicidad
Manuales relacionados para Westin 30-0000
Resumen de contenidos para Westin 30-0000
- Página 1 APLICACIÓN: HYUNDAI TUCSON, MOD. 2005-08 APPLICATION: HYUNDAI TUCSON 2005-08 AUTOMOTIVE PRODUCTS, INC. SAFARI BAR ASSEMBLY BARRA PARA PARRILLA SAFARI MONTAGE DE LA BARRE PARE- CHOCS SAFARI 30-0000 30-0005 MOUNT KIT EQUIPO DE MONTAJE JEU DE MONTAGE 30-1385 ITEM CONTENTS - CONTENIDO - CONTENU...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 FIGURA 3 LADO DEL ACOMPAÑANTE FIGURA 3 LADO DEL ACOMPAÑANTE FIGURE 3 CÔTÉ PASSAGER ILLUSTRÉ FIGURE 3 CÔTÉ PASSAGER ILLUSTRÉ Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca.