Removing The Refrigerator Doors - Samsung RF266 Manual De Usuario

Setting up your French Door Refrigerator
HOW TO ASSEMBLE THE HANDLES (CONT'D)
Freezer / Flex zone door handle assembly
Please do not remove the Freezer / Flex Zone drawer. Handle can be attached without removing the door.
CAUTION
REMOVING THE REFRIGERATOR
If your entrance won't allow the Refrigerator to pass easily
through it, you can remove the doors.
Disassemble the Refrigerator doors
1. With the door closed, remove the top table(
using a Philips screwdriver, and then disconnect the
wires( ). Remove hinge screws(
2
screw( )
4
2. Lift the door straight up to remove.
3. With a Philips head screwdriver, remove the two
screws( ) attached to the lower left and right
10
door hinges.
With an Allen Wrench(3/16"), remove the two hex
head bolts( ) attached to the lower left and right
11
door hinges.
Remove the lower left and right door hinges(
10_ Setting Up
OK OK
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
Tools you will need
Philips screwdriver
Flat-blade screwdriver
)
1
) and ground
3
).
12
Put the handle on the xer
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
* Tilt up the Handle bar and turn the wrench.
10mm Socket Wrench Allen wrench(3/16")
Pliers
3
4
12
10
11
1
2