Light Effects - auna multimedia DisGo Manual Del Usuario

• Press MODE repeatedly or press the BT button to change to BT mode.
• Activate BT on the device you want to connect, search for DisGo and pair your smartdevice with it. The
BT LED lights up as the connection is successfully established.
• Play music from the connected BT device. You can use the DisGo volume knob to adjust the output
volume level.
• Press and hold the BT button to disconnect from the currently paired BT device and change to pairing mode.
Connect any external media players with the AUX in using a 3.5mm audio cable. Press MODE repeatedly
to select AUX mode. Use your external device (typically a laptop PC, smartphone, tablet, MP§ player, etc.)
to play media. Adjust the output volume level using the VOL control on both the DisGo and your external
media player.
• The DisGo automatically detects connected microphones at the MIC1 / MIC2 jacks.
• Adjust the overall output volume with the VOL knob. Adjust the microphone volume rotating MIC VOL.
• Turn the ECHO knob to adjust the integrated reverb effect.
• Avoid pointing the microphone towards the speakers or trying to protect the microphone capsule by
covering it with your hands when feedback hum occurs.
Press LIGHT MOOD repeatedly (1x = red; 2x= green; 3x= blue; 4x= auto; 5x = off), to select the desired light
effect. the effect intensity is controlled by the musical dynamics. Light effects are inactive when no sound
is played over the DisGo.
Insert a USB drive into the USB port to playback music files. Press MODE to select USP mode. Use
/ to navigate.
14
BT
AUX
Karaoke

Light effects

USB
/