Scope Of Delivery - Kärcher 2.643-381.0 KM Medium Manual Del Usuario

1 Kärcher Fleet
Please read and comply with these instruc-
tions prior to the mounting of your appliance.
Retain these mounting instructions for future reference or
for subsequent possessors.
1.1 Description
These installation instructions describe the installation and
connection of a Fleet Management module.
1.2 Safety instructions
Assembly must be carried out by a qualified specialist.

Turn off appliance and secure against restart.

Park the appliance on a level surface and secure it

against rolling away (e.g. by means of wheel chocks
underneath the wheels).
Disconnect the battery prior to performing work on the

electrical installation.
2

Scope of delivery

Name
Fleet Management module
Antenna with connection cable
Cable harness TCU
Support
3 Assembly
3.1 Preparing the machine software
The machine software must be prepared before installing
the hardware.
1 The software version should be determined; if it is lower
than V4.4, it will be necessary to run an update.
2 The part number and the serial number of the sweeper
must be entered and saved.
3.1.1 Connecting the Servicetool to the control unit
Piece Part no.:
1 4.683-027.0
1 6.682-017.0
1 4.822-963.0
1 5.096-010.0
EN
The Fleet Management module, for short TCU (Telematics
Control Unit), is used to transfer important status and us-
age data of the device.
CAUTION
Risk of destruction by electrostatic discharge (ESD)!
The following measures must be taken prior to working on
electronic components to avoid damages:
Wear ESD shoes.
–
Touch one of the battery terminals with your hand for
–
equipotential.
Do not remove the electronics from their packaging un-
–
til you are ready to start the installation.
Name
Screw M4x6
Screw 5x16
Template KM 105/...
Template KM 125/...
Connect the laptop to the control unit.

Switch on the sweeper (position ON).

Start the service programme.

Determine the software version of the machine control.

If the software version is lower than V4.4, run an up-

date.
1
-
Piece Part no.:
3 7.306-236.0
4 7.303-107.0
1 5.096-161.0
1 5.096-162.0
9