Operation - HAMPTON BAY MH35BL Guía De Uso Y Cuidado

operation

USING THE MANUAL AND REMOTE CONTROLS
On the top-right side plate of the electric fireplace (A) is the control panel. This panel contains the buttons to properly operate the electric
fireplace. The buttons on the control panel on the side of the electric fireplace (A) and the remote control (L) function in the same way. The
remote control has an effective range of up to 13 feet.
1. Power Button
2. Flame Control Button
3. Thermostat Control Button
4. Side Light Control Button
5. Timer Control Button
6. Digital Display Panel
USING THE POWER BUTTON
□ The main power button (1) is located on the control panel
on the side of the electric fireplace.
□ Pressing the power button (1) once turns the power on.
□ Pressing the power button (1) again will turn the power
off.
□ The power button (1) on the control panel must be on for
the remote control to work.
□ If you find that none of the other buttons appear to work,
check to make sure that the main power (1) is turned on.
USING THE FLAME CONTROL BUTTON
□ Press the flames control button (2) to turn on the ember
bed and flame effect.
□ Pressing the flames control button (2) once turns flames
on and lights the ember bed.
□ Pressing the flames control button (2) again will cycle
through different colors of the ember bed. The color
rotation mode will cycle through the 3 different color
settings continuously. Reference the table for more
detailed information.
4
3
L
11
1
2
5
Button Press Flame State
1st Press ON
2nd Press ON
3rd Press ON
4th Press ON
Please contact 1-877-527-0313 for further assistance.
6
5
4
3
2
1
Ember Bed Color
Amber
Blue
Amber and Blue
Color Rotation
HAMPTONBAY.COM