Headphone Volume; Sound Mode; Alternate Audio; Digital Audio Language - Magnavox 50MF231D Guia Del Usuario

Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D symbol are trademarks of
Dolby Laboratories.
English_DFU_37131.indd 16

Headphone volume

This controls the level of sound through the headphones.

Sound mode

This selects the modes for stereo or surround sound reproduction dependent on
the broadcast signals or signals from external inputs received.

Alternate audio

(only selectable with analog broadcast signals)
This gives you the possibility to swap between the Main and Second audio
Program (SAP) when it is available.

Digital Audio language

(only selectable with digital broadcast signals)
This allows you to select your language preference in case of multilingual audio
track programs if available with digital broadcast signal.
Note: The default language for the digital channels is the installed menu language.

Mono/Stereo

This selects, per TV channel, Mono or Stereo sound when analog stereo
broadcasts are available.

AVL (Automatic Volume Leveler) (only available with analog broadcast and non-

Digital signals)
This automatically reduces the volume differences between channels and
programs, providing a more constant overall level. This will also reduce the
dynamics of sound.

Delta volume

This allows you to correct for any permanent volume differences between TV
channels or external sources.

Features menu

Select in the TV Settings menu.
Features
&
Press the cursor right to enter the features menu.
é
Select the menu items with the cursor up/down and adjust the settings with the
"
cursor left/right.

Closed captions

This displays the transmitted CC- or CS-text on the screen according to your
chosen CC or CS service in the Setup, Features preferences menu,
p. 10. This text can either be permanently displayed (assuming that the service is
available in the broadcast) or only when mute is active.
Press the cursor right after having selected
&
Select , or
On Off On during mute
é

Sleeptimer

This sets a time period after which the TV automatically turns to standby.
Select Sleeptimer .
&
Press the cursor right.
é
Select a value with the cursor up/down. The list will have values from
"
minutes .
When is selected, the sleeptimer is turned off.
0
You can always turn off your TV earlier or select another time set.
16
.
Closed captions
.
to
0 180
2006-03-29 6:30:54 PM