Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Once you have made the right connections, follow these steps to start to
use the equipment:
1.- Turn the TV set on and choose channel 3 or 4 (usually, you need to
choose the channel without signal).
2.- Select channel 3 or 4 in the modulator.
3.- Turn the AV source on.
4.- Place the 75/1k switch in the position where you get the best image
quality.
5.- If the equipment is in use, an indicator will light in frontal panel.
General
Input:
Video output:
RF output channels:
RF output impedance:
Video input impedance: 75ohm to 1kohm
Audio input impedance: 13 + 3kohm
Loss insertion from
50 to 806MHz:
Weight:
Dimensions:
Product design and specifications are subject to change without
previous notice.
HOW TO USE THE MODULATOR
SPECIFICATIONS
110V~ 60 Hz 1,5 W
69dB uV
3 or 4
75ohm
2dB
0,36kg
6 x 3 x 1,5in
ENGLISH-05
Publicidad
Tabla de contenido
