Dismantling; Cleaning; Repairs; Disposal Of Old Electrical Appliances - FAR FP113 CI Manual De Instrucciones

English
Assembling the citrus press
Position the drive shaft (2) on the motor unit (1).
1.
Position the mixing bowl (3) on the drive shaft, then turn it in a clockwise direction
2.
to secure it to the motor unit.
Place the citrus press (4) in the bowl, then turn it 30 degrees in a clockwise
3.
direction, until it is locked on the bowl.
Place the cone (15) on the citrus press.
4.
Advice and warnings
• Choose a slow speed when using the citrus press.
Speeds selection for different functions
• "1" is low speed, using for citrus juicer assembly and emulsifying function.
• "2" is high speed, using for chopper, slicing, shredding, grating, dough hook and
blender functions.
• "P" is pulse speed, using for starting the appliance with maximum speed in shortly
time, as well as testing the appliance before use.
• "0" is off position to stop appliance.

DISMAnTLIng

Remove the pusher. Turn the lid in an anti-clockwise direction, then lift it up to
1.
remove it.
Lift up the drive shaft adapter/holder
2.
Lift up the knife/disc, then detach it from the adapter/holder.
3.
Turn the bowl in an anti-clockwise direction to unlock it from the motor unit. Lift
4.
it up to remove it.

CLEAnIng

• Wash all parts other than the motor unit in hot soapy water. You can dismantle
the disk to wash it in water. Be very careful when dismantling.
• Please disassemble the citrus juicer set and flush by water directly, then wipe it
with a piece of wet cloth and dry it out on platform.
• Chopper: Please take the food out from processing bowl and assemble chopper
again, add some water and re-start the appliance in "p" position for a while, stop
the appliance after cleaning the residual of blade. Then wipe the chopper with a
piece of cloth. Please don't touch the blade by your hand directly, it's very sharp
to scratch yourself.
• Citrus juicer / Dough hook / Slicing / Shredding / Grating blade: Please
disassemble the accessories correctly and flush by water directly, then wipe it with
a piece of wet cloth and dry it out on platform.
• Blender: Put into the blender mug proper amount of warm water and a little food
detergent, cover the mug and press the pulse button for about 10 seconds; or soak
the mug into the water to wash with a brush.
GB-8

REpAIRS

problems Solutions
The food processor is not working. Make sure that it is correctly assembled.
The food processor suddenly stops working. The bowl can be unlocked when the food processor is operating
at full load. Replace the lid on the bowl.
The motor is working, but the knife/disc is not turning. Make sure that the drive shaft is correctly installed.

DISpoSAL of oLD ELECTRICAL AppLIAnCES

The European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human
health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
English
GB-9