Remote Control; Fan Speed - GE UCT30RWA Manuel Du Propriétaire

Remote Control Features and Settings

Remote Control

2
3
4
7
9
12
10
16
17
1. Power Button
Press the ON/OFF button on the remote control to start or
stop the unit.
2. Turbo Button
The TURBO function is used for fastest air flow in Heating
or Cooling modes. Control will display the TURBO icon
[UP ARROW] on the bottom right side of the remote
display. Pressing the TURBO button again or the FAN
SPEED button will turn TURBO off.
3. COOL Button
In COOL mode, the unit operates in cooling. When FAN is
set to AUTO, the air conditioner automatically adjusts the
fan speed according to the room temperature. The
be displayed during COOL mode.
4. FAN Button
FAN mode circulates air only; there is not temperature
adjustment available. Use the fan speed button (5) to
adjust fan speed from low, medium, to high. Auto, Turbo,
and Quiet are not available.
4
5. DRY Button
DRY mode is used to reduce humidity. In DRY mode,
when room temperature becomes lower than temp.
setting +1°C, unit will run intermittently at LOW speed
regardless of FAN setting. The
DRY mode.
6. Temperature +/- Buttons
Temp + Every time the button is pressed, the temperature
setting increases.
1
Temp - Every time the button is pressed, temperature
setting decreases.
5
The operating temperature range is 60°F-86°F (16°C-30°C).
6
7. FAN SPEED Button
FAN SPEED: For each setting, press the fan speed
10 8
changes as follows:
Remote Control:
14
8. Louver Swing Button - UP/DOWN
Press the LOUVER UP/DOWN button to choose the
13
position of the horizontal airflow louvers.
Status display of air flow
15
COOL/DRY:
11
18
NOTE:
• It is advisable not to keep the vertical louver in the
downward position for an extended period of time in
COOL or DRY mode, otherwise condensate water may
form on the louver.
• When turning the unit on, the remote control will
automatically return the louver to the previous set swing
position. When turning the unit off, the louver will rotate
to the full open position prior to closing.
9. Louver SWING Button - SIDE/SIDE
Press the LOUVER SIDE/SIDE button to choose the
position of the vertical airflow louvers.
Status display of air flow
COOL/DRY
NOTE:
will
• When humidity levels are high, condensate water may
occur at the air outlet if all vertical louvers are adjusted
to far left or right.
• When turning the unit on, the remote control will
automatically return the louver to the previous set
position.
will be displayed during
49-5000420 Rev. 0