GE UCT30RWA Manuel Du Propriétaire página 5

Remote Control Features and Settings
10. Timer ON Button
1. Start the unit and select the desired operating mode
2. Press the TIMER ON button to enter the TIMER ON
mode. The remote control will start flashing "ON"
3. Every time the TIMER ON button is pressed, the length
of time increases in 0.5 hour increments between hours
0 and 12, and 1 hour increments for times between
hours 12 and 24.
4. Once the desired length of time is selected for the unit
to turn on, press the CONFIRM/CANCEL to confirm
this setting.
The remote control display changes as follows:
0.5h 0.5h 0.5h
TIMER ON TIMER OFF TIMER ON-OFF
Cancel TIMER ON setting:
With a TIMER ON set, press the CONFIRM/CANCEL
button once to cancel the TIMER ON.
NOTE: Holding the TIMER ON button down will rapidly
cycle the time. After replacing batteries or a power failure
occurs, the time setting will need to be reset.
According to the Time setting sequence or TIMER ON
or TIMER OFF, either Start-Stop or Stop-Start can be
achieved.
11. Timer OFF Button
On-Off Operation
1. Start the unit and select the desired operating mode.
2. Press the TIMER OFF button to enter the TIMER OFF
mode. The remote control wil start flashing "OFF"
3. Every time the TIMER OFF button is pressed, the
length of time decreases in 0.5 hour increments
between hours 0 and 12, and i hour increments for
times between hours 12 and 24.
4. Once the desired length of time is selected for the unit
to turn off, press the CONFIRM/CANCEL to confirm
this setting.
The remote control display changes as follows:
0.5h 0.5h 0.5h
TIMER ON TIMER OFF TIMER ON-OFF
Cancel TIMER OFF setting:
With a TIMER OFF set, press the CONFIRM/CANCEL
button once to cancel the TIMER OFF.
NOTE: Holding the TIMER OFF button down will rapidly
cycle the time. After replacing batteries or a power failure
occurs, the time setting will need to be reset.
According to the Time setting sequene of TIMER ON
or TIMER OFF, either Start-Stop or Stop-Start can be
achieved.
49-5000420 Rev. 0
BLANK
0.5h
TIMER OFF-ON
BLANK
0.5h
TIMER OFF-ON
12. SLEEP Button
Sleep mode
Before going to bed, you can simply press the SLEEP
button and the unit will operate in SLEEP mode and bring
you a sound sleep.
Sleep operation Mode
1. SLEEP mode during COOL, DRY modes
One hour after SLEEP mode starts, the temperature
will rise 1°C above set temperature, after another hour,
the temperature rises an additional 1°C. The unit will
run for an additional six hours, then turns off. The final
temperature is 2°C higher than the initial set temperature.
Using this feature will help with achieving maximum
efficiency and comfort from your unit while you sleep.
SLEEP operation starts
1 hr
1 hr
Temp.setting
In COOL, DRY mode
2. In AUTO mode
The unit operates in corresponding sleep mode adapted
to the automatically selected operation mode.
NOTE:
When the unit is set to sleep mode, the fan speed will
●
be set to low speed and cannot be changed.
When the TIMER function is set, the sleeping function
●
cannot be set. If the sleeping function has beeen set,
and the user sets the TImer Function, the sleeping
function will be canceled, and the unit will be set to the
timer function.
13. Fahrenheit/Celcius Button
Press F/C to toggle remote and unit display temperature
between Fahrenheit and Celcius.
14. Quiet Button
The QUIET function switches the fan to the lowest speed.
The control will display the QUIET icon (DOWN ARROW)
on the bottom left side of the remote display. Press the
Quiet button again or the FAN SPEED button to exit
QUIET mode.
15. Confirm/Cancel Button
Function: Setting and canceling timer and other
functions.
16. LOCK Button
Used to lock buttons and LCD Display
17. LIGHT Button
Turns indoor unit display on and off
18. RESET Button
If the remote control is not functioning properly, use a pen
point or similar object to depress this button to reset the
remote.
SLEEP operation stops
Approx.6hrs
Rises 1 O C
Rises 1 O C
Unit stop
5