Stopping The Washing Programme; Programme Completed; Plant Closed - Kärcher Professional CR 214 Manual Del Usuario

Stopping the washing programme

 Stop the washing programme by touch-
ing the "Stop" button on the touch-
screen.
Note:
With some washing plant designs stopping
the washing programme is not possible. In
this case, the "Stop" button is not dis-
played.
Washing stopped.
 Select "continue" to continue wash.

Programme completed

The end of the washing programme and
the drive-out direction are shown on the
touchscreen.
 Program end: Reverse vehicle out of
the washing bay
 Program end: Drive vehicle forwards
out of the washing bay.

Plant closed

Display outside opening hours.
Note:
The opening times are set on the washing
bay. The CR 214 receives the times and
displays them outside of opening times.
Frost protection active.
A safety switch was actuated.
The affected safety button is displayed.
 Eliminate reason.
 Reset safety switch.
 Press "Continue" on the touch screen.
Vehicle is incorrectly positioned.
 Eliminate reason.
 Reset safety switch.
 Press "Continue" on the touch screen.
3
-
EN
Washing plant failure!
 Rectify failure using the operating in-
structions of the washing plant.
Note:
A programme started prior to the failure
cannot be continued.
Network connection to washing bay is inter-
rupted.
 Check network connection and restore.
Emergency off has been pressed.
Main cabinet is not closed on washing bay.
 Close and lock door.
 Press "Continue" on the touch screen.
Water distribution doors are not closed on
washing bay.
 Close and lock door.
 Press "Continue" on the touch screen.
11