Model Descriptions / Specification - FSP Hydro PTM+ Manual Del Usuario

Model Descriptions
HPT1200M：1200W Active PFC Power Supply
Specification
•Complies with ATX12V v2.4 & EPS12V v2.92
•High efficiency ≧ 92%
•Active PFC ≧ 0.9
•Comply with 80PLUS® platinum certification
•Hybrid cooling system with 135mm FDB silent fan & liquid cooling
•+12V single-rail design
•Full Japanese capacitors
•World's 1st Platinum liquid PSU
•Build in RGB lighting & controller
•Dimension: 150*200*86mm (5.9*7.9*3.4 in)
•Operation temperature: 0~40°C(Normal input voltage)
•Complete protections: OCP, OVP, SCP, OPP, OTP
HPT1200M
AC Input
DC Output
Max. Output Current
Max. Combined Power
Total Power
Attention
100-240V~ 15-9A 60-50Hz
+3.3V +5V
24A 24A
120W
• Please make sure the modular connector must be connected with
flat cable closely.
HYDRO PTM+ Series is full modular design, each cable, connector
come with its connector design, please:
1) Make sure connectors have been connected until hear "Click"
2) If connectors broken, please stop using and contact with your
dealer immediately.
3) It's recommended to check connectors per 6 months.
4) Connectors would be burned or short circuit occurred if connectors
loose.
• Warranty does not cover side stickers. Stickers should only be used
once.
• Intelligent fan will start to spin when loading operation is over 30%.
01
-12V
+12V
100A 0.3A
1200W 3.6W
1200W
+5Vsb
3A
15W