Cabinet Installation - LG LWHD2500ER Manual Del Usuario

Cabinet Installation

1. Open the window. Mark a line on the center of the
window stool between the side window stop
moldings.
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock nut.
2. Attach the sill bracket to the window sill using the
screws (Type B).
Carefully place the cabinet on the window stool
and align the center mark on the bottom front with
the center line marked window stool.
3. Using the M-screw and the lock nut, attach the
support bracket to the cabinet track hole. Use the
first track hole after the sill bracket on the outer
edge of the window sill. Tighten the carriage bolt
and the lock nut. Be sure the cabinet slants
outward.
Do not drill a hole in the bottom pan. The unit is
designed to operate with approximately 1/2" of
water in bottom pan.
4. Pull the bottom window sash down behind the Top
retainer bar until they meet.
NOTICE
1. Do not pull the window sash down so tightly
that the movement of Frame curtain is restricted.
Attach the cabinet to the window stool by driving
the screws (Type B) through the cabinet into
window stool.
2. The cabinet should be installed with a very slight
tilt downward toward the outside.
Sill
Bracket
3
Carriage
Bolt
9
Cabinet
Track hole
Support
Bracket
2
Carriage bolt
and lock nut
Upper
Guide
11
15
Installation
Support
Bracket
2
Lock nut
4
Fig. 1
Machine screw(Type D)
and lock nut
Outer edge
of window
sill
(Type B)
6
Sill bracket
3
Fig. 2
Fig. 3
Fig. 4
Owner's Manual 13