Publicidad
Idiomas disponibles
Idiomas disponibles
USER MAINTENANCE INSTRUCTIONS
Transporting and handling:
1. When transporting the inflator always hold it by the carrying handle. Do not pull, lift or
carry the inflator by power cord or air hose as damage may occur.
2. When using (or storing) the inflator be sure to protect the power cord from being cut or
damaged by sharp objects. Use carrying bag for best protection when not in use.
3. After each use, completely power down the inflator by moving the On/Off power switch
to the "O" position and then removing the 12 Volt plug from the power outlet.
4. Never remove the power plug by pulling on the power cord – pull by the plug only.
5. The weight of one inflator is: 3.6 lbs.
CLEANING AND STORGAGE
Before and after use:
1. When not in use always clean and store the inflator correctly to protect for future use.
2. Dirt or moisture could cause the inflator to malfunction.
3. Do not clean (or store) the inflator when it is attached to a power supply.
4. Allow the inflator to cool completely before cleaning or storing.
5. Wipe exterior surfaces clean using mild soap and warm water. Do not get moisture
(or water) into the interior of the inflator or in and around the On/Off power switch.
6. After cleaning, store the inflator in the carrying bag (with attachments).
7. Always store the inflator in a clean and dry environment.
8. Always inspect the inflator for damage before use. Do not use if damaged.
9. This inflator has no user serviceable parts. If you have questions or problems, contact
our customer service department at www.bon-aireindustries.com.
6
www.bon-aireindustries.com
Publicidad
Solución de problemas
