Buttonholes - Medion MD 17187 Manual De Instrucciones

6.12. Buttonholes

TIP
To determine the correct stitch length, we recommend you sew a test button-
hole on a scrap of fabric.
Presser foot: .............................................................................. Buttonhole presser foot
Programme: ............................................................. Automatic buttonhole function
Stitch length: ..........................................................................................................0.25 to 1
 Set the foot and needle (26) to their highest position. Replace the foot with
the buttonhole presser foot.
 On the fabric, mark where you want to sew the buttonhole and its length.
Use a pencil or tailor's chalk.
6.12.1. Procedure
 Use the programme selection dial (6) to select programme S to sew the left
bartack.
 Pass the upper thread through the opening on the buttonhole presser foot
and pull both the upper and lower threads to the left-hand side. Lower the
foot and sew slowly until you have achieved the desired length for the side
bartack.
 Raise the needle (26) to its highest position again and change to pro-
gramme T for the bottom bartack.
 Sew a few stitches of the bottom bartack.
 Raise the needle (26) to its highest position again and change to pro-
gramme U for the right-hand bartack.
 Now sew the right-hand bartack with exactly the same length as the left-
hand side.
 Raise the needle (26) to its highest position and select programme T again
for the top bartack.
 Then sew a few stitches for the top bartack, just as you did for the bottom
bartack.
Sewing
ES
EN
DE
65 of 122