The screws supplied are suitable for mounting in wood. Appropriate
screws must be used for other materials. It is not necessary to drill in
the shelf when mounting on wood.
Push the device with the recess where the cover was located onto the retain-
ing pins of the bracket and carefully push the device to the rear. Ensure a se-
cure hold.
Warning!
Risk of fire/short circuit!
Rising steam or heat can pose a risk of electric shock
or fire if a short circuit occurs.
Never mount the device above a hob or any oth-
er heat or steam source (for example, electric ket-
tles, etc.).
Never allow the connection cable to hang over a
cooker hob or other heat source.
4.1. Free-standing installation
Instead of mounting the device on a cupboard/shelf, you can also put it on a ta-
ble or a cupboard without having to fix it permanently into place.
170