Jet Swim 2000
Product Description
Jet Swim is an apparatus used for training, exercise and recreation. It features an adjustable jet stream for personal
customisation of the water flow and air admixture.
Jet Swim 2000 consists of four parts:
1. Base kit
1302000
2. Assembly kit 1302010 Liner, 1302020 Concrete/liner
3. Pump kit
1302080 (50Hz), 1302080HZ (60Hz)
4. Control box
1302090 (400/460V), 130209NO (230/265V) Norway only
The pump section is installed on a stable surface in a dry area. Make sure that the area is well ventilated and is equipped with
a drain in order to prevent flooding.
All installation of stainless steel parts shall be done using tools solely intended for such material in order to maintain its
corrosion-resistance.
Technical Data
Motor
Voltage
Current
Pump capacity
Enclosure protection class
Dimensions
150-200
250
970 (820)
360 (210)
630 (480)
4.0 kW
230/400V 50Hz 3N~
13.9 / 8.0 A
70 m
/h
3
IP55
1100
Ø13 (2x)
C-C 130
Drain
Dimensions put in brackets refer to item no.1302010 for liner pools with walls made of wood,
sheet or plastic.
265/460V 60Hz 3N~
12.5 / 7.2 A
67 m
/h
3
*Note! Dimension 230 if the pool is to have a slat cover.
Recommended water quality values for this
product:
Outside these values the product warranty does
not apply.
Total chlorine content:
Chloride (salt) content:
pH-value:
Alkalinity
Calcium hardness:
:
Iron
:
Copper
:
Manganese
Phosphorus:
Nitrate:
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
6
ENGLISH
200 -230*
410
max 3.5 mg/liter*
max 250 mg/liter
7.2–7.6
60–120 mg/liter (ppm)
100–300 mg/liter (ppm)
max 0.1 mg/liter*
max 0.2 mg/liter*
max 0.05 mg/liter*
max 0.01 mg/liter*
max 50 mg/liter*
* According to EN16713-3 2016
Surface treatment
E
The tolerance class in accordance with this
Assembly drawing no.
part of ISO 2768-1
Jet Swim 2000 Betong
inkl. maskinrum
Designed by:
Drawn by: Date
Approved by:
TS
2007-06-19
Art.no.
Scale
Revised by: Date
1:7
ASA 2017-07-0
Drawing number
Rev.no.
M10200 6