• There is a small gap between the brush head
and the main unit (a few mm). This is
necessary for operation and this is the
normal condition.
2
Place the toothbrush in your mouth.
To avoid spattering of toothpaste, put the brush head in your
mouth before turning the power on.
• Apply a small amount of toothpaste.
3
Press the power switch to turn on the
main unit.
• Move the brush head with the bristles lightly
touching your teeth.
• When fi rst using this appliance, some people
may experience a tickling or tingling sensation
caused by the sonic vibrations.
The sensation should subside after you use the
toothbrush several more times.
• A sound may be heard when the brush head is
pressed too strongly against the teeth, but this is
not a malfunction.
12
4
Select the mode.
• Each time you press the power
switch, the mode changes.
The selected mode indicator will
glow.
• To switch the mode, press the
power switch within 5 seconds.
(Diagram:
)
• The power is turned OFF when the power switch is pressed
after operating for 5 seconds or longer in each mode.
(Diagram:
)
Mode storage function
The mode used last is stored.
The toothbrush operates in the mode last used when the
power switch is turned on.
Example) When the power switch is turned off after using in
the "SOFT" mode, it will start from the "SOFT" mode when
the power switch is turned on the next time.
Mode
REGULAR Recommended for normal brushing.
Recommended when you feel the REGULAR
SOFT
mode is too powerful.
5
Turn off the main unit when you have fi nished
brushing.
• Turn off the main unit before removing it from your mouth to
prevent saliva from spattering.
[
: 5 seconds or
longer]
[
: Within
5 seconds]
Description