Operating Your Air Purifier - Hunter HEPA Manual Del Usuario

OPERATING YOUR AIR PURIFIER:

Each time you start the air purifier, it is a good idea to run it on high for a few
seconds for fast, initial cleaning. Then set to medium or low as desired.
Power – Touch power icon
OFF.
Fan Speed – The fan speed can be adjusted at any time by touching the fan
icon on the top of the unit.
(L) Low – Recommended for use when soft background noise is unwanted.
(M) Medium – Typical usage setting. Soft background noise is not an issue.
(H) High – Use when quick, efficient results to a room's air quality are desired.
Filter Reset – After changing the filter, press and hold for 3 seconds the filter
reset icon until indicator light is gone to reset the usage timer.
Timer – Touch timer icon
(1) (2) (4) represents a number of hours. Any combination of timer lights may
be used at one time.
For example:
(1) = 1 hour
(1) (2) = 3 hours
(1) (4) = 5 hours
(2) (4) = 6 hours
(1) (2) (4) = 7 hours
Ionizer – Touch ionizer icon (ion) on the sensor pad to turn on and off the
function.
Ionizer Filter Reset
Purifier
on the sensor pad. This will turn the unit ON and
on the sensor pad. Each of the three timer lights
Timer
8
Fan Speed Power