WAGNER W 687 E Manual Del Usuario página 38

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
b)
Never use the tool in hazardous areas that contain flammable liquids, gases
or dusts. Power tools generate sparks that can ignite the dust or vapors.
c)
Keep children and other persons away when using the power tool.
lose control of the tool if you are distracted.
2. Electrical Safety
a)
The tool plug must fit into the socket. The plug may not be modified inany
form. Do not use adaptor plugs together with protective-earthed tools.
Unmodified plugs and suitable sockets reduce the risk of an electric shock.
b)
Avoid physical contact with earthed surfaces such as pipes, heating
elements, stoves and refrigerators. The risk through electric shock increases if
your body is earthed.
c)
Keep the equipment away from rain and moisture.
increases if water penetrates electrical equipment.
d)
Do not misuse the mains lead by carrying the tool by the lead, hanging it
from the lead or by pulling on the lead to remove the plug. Keep the lead
away from heat, oil, sharp edges or moving tool parts. Damaged or twisted
leads increase the risk of an electric shock.
e)
If you work outdoors, use only extension leads that are approved for
outdoor use. The use of an extension lead that is suitable for outdoors reduces the
risk of an electric shock.
3. Safety of Persons
a)
Be attentive. Pay attention to what you are doing and work sensibly with
apower tool. Do not use the tool if you are tired or under the influence of
drugs, alcohol or medication. Just a moment of inattentiveness while using the
tool can lead to serious injuries.
b)
Wear personal safety equipment and always wear safety goggles
personal protective equipment, such as dust mask, non-slip safety shoes, safety helm
or ear protection, depending on the type of power tools, reduces the risk of injury.
c)
Avoid accidental starting-up. Ensure that the switch is in the "OFF" position
before inserting the plug into the socket. Accidents can occur if you carry the
power tool while your finger is on the switch or if you connect the power tool to the
power supply which it is on.
d)
Remove setting tools or wrenches before switching on the power tool.
or wrench that is in a rotating tool part can lead to injuries.
e)
Do not overestimate your abilities. Ensure that you are standing securely
and have your balance at all times. This ensures that you can control the tool
better in unexpected situations.
f)
Wear suitable clothing. Do not wear wide clothing or jewelry. Keep yourhair,
clothes and gloves away from moving parts. Loose clothing, jewelry or long hair
can be caught in moving parts.
32
W 687 E
You can
The risk of an electric shock
Wearing
A tool

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Click&paint w 687 e

Tabla de contenido