IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY
PRECAUTIONS
ALWAYS DO THIS
Your air conditioner should be used in such a way
that it is protected from moisture. e.g. condensa-
tion, splashed water, etc. Do not place or store your
air conditioner where it can fall or be pulled into
water or any other liquid. Unplug unit immediately if
this occurs.
Always transport your air conditioner in a vertical
position and place on a stable, level surface during
use. If the unit is transported laying on its side it
should be stood up and left unplugged for 4 hrs.
Turn off the unit when not in use.
Always contact a qualifi ed person to perform
repairs. If the power cord is damaged it must be
repaired by a qualifi ed technician.
Keep clearance of at least 50cm all around the unit
from walls, furniture and curtains.
If the air conditioner is knocked over during use,
turn off the unit and unplug it immediately.
Always use the button on the control panel to turn
off unit.
ENERGY SAVING
TIPS
• Use the unit in the recommended room size.
• Locate the unit where furniture cannot obstruct the air fl ow.
• Keep blinds/curtains closed during the sunniest part of the day.
• Keep the fi lters clean.
• Keep doors and windows closed to keep cool air in and warm air out (cooling mode).
NEVER DO THIS
Do not operate your air conditioner in a wet room
such as a bathroom or laundry room.
Do not touch the unit with wet or damp hands.
Do not press the buttons on the control panel with
anything other than your fi ngers.
Do not remove any fi xed components. Never use
this appliance if it is not working properly, or if it
has been dropped or damaged.
Never use the plug to start and stop the unit.
Do not cover or obstruct the inlet or outlet grilles.
Do not use hazardous chemicals to clean or other-
wise come into contact with the unit. Do not use the
unit in the presence of infl ammable substances or
vapour such as alcohol, insecticides, petrol,etc.
Do not allow children to operate the unit unsuper-
vised.
Do not use this product for functions other than
those described in this instruction manual.
2